Filter
Top Products
ERROR: Unit 2 (Portcard 2): XE 11 is DOWN
+ XE Link Status Test for unit 2 (Portcard 2): FAILED
portcardXELinkStatusTest .................................... FAIL
qsfpOpticsTest .............................................. PASS
qsfpPhyTest ................................................. PASS
qsfpPresenceTest ............................................ PASS
rtcTest ..................................................... PASS
sataSsdTest ................................................. PASS
--------- Group Test Statistics ---------
Total : 22
Passed : 21
Failed : 1
Elapsed time : 00H:00M:56S
Stop reason : after completion
------ Failed tests (level, times) ------
portcardXELinkStatusTest (1, 1)
Example of the show diag Command
Dell# show diag linecard 0 detail
Diag status of linecard member 0:
--------------------------------------------------------------------------
linecard is currently offline.
linecard alllevels diag issued at Mon Jan 20, 2014 02:33:48 AM.
Current diag status : Card diags are done.
Duration of execution (Total) : 1 min 9 sec.
Diagnostic test results located: flash:/TestReport-LP-0.txt
Last notification received at Mon Jan 20, 2014 02:34:57 AM
Last notification message : Alllevels diag done.
--------------------------------------------------------------------------
DELL DIAGNOSTICS-Z9500-CP00 [0]
PPID -- NA
PPID Rev -- NA
Service Tag -- NA
Part Number -- NA
Part Number Revision -- NA
SW Version -- 9.2(1.0B2)
Available free memory: 2,646,888,448 bytes
LEVEL 0 DIAGNOSTIC
eepromTest .................................................. PASS
i2cTest ..................................................... PASS
macPhyRegTest ............................................... PASS
Starting test: pcieScanTest ......
22 PCI devices installed out of 22
pcieScanTest ................................................ PASS
portcardBcmIdTest ........................................... PASS
Starting test: portcardBoardRevisionTest ......
+ Access Test for BCM unit 0 : PASSED
+ Access Test for BCM unit 1 : PASSED
+ Access Test for BCM unit 2 : PASSED
portcardBoardRevisionTest ................................... PASS
qsfpOpticsTest .............................................. PASS
qsfpPhyTest ................................................. PASS
rtcTest ..................................................... PASS
sataSsdTest ................................................. PASS
Debugging and Diagnostics
301