Filter
Top Products
1
About this Guide
This guide describes the protocols and features that the Dell Networking Operating Software (OS)
supports on the Z9500 system and provides configuration instructions and examples for implementing
them.
Though this guide contains information on protocols, it is not intended to be a complete reference. This
guide is a reference for configuring protocols on Dell Networking systems. For complete information
about protocols, refer to related documentation, including IETF requests for comments (RFCs). The
instructions in this guide cite relevant RFCs. The Standards Compliance chapter contains a complete list
of the supported RFCs and management information base files (MIBs).
Audience
This document is intended for system administrators who are responsible for configuring and maintaining
networks and assumes knowledge in Layer 2 and Layer 3 networking technologies.
Conventions
This guide uses the following conventions to describe command syntax.
Keyword
Keywords are in Courier (a monospaced font) and must be entered in the CLI as
listed.
parameter Parameters are in italics and require a number or word to be entered in the CLI.
{X} Keywords and parameters within braces must be entered in the CLI.
[X] Keywords and parameters within brackets are optional.
x|y Keywords and parameters separated by a bar require you to choose one option.
x||y Keywords and parameters separated by a double bar allows you to choose any or
all of the options.
Related Documents
For more information about the Dell Networking Z9500 system, refer to the following documents:
• Dell Networking Z9500 Getting Started Guide
• Dell Networking Z9500 Installation Guide
• Dell Networking Z9500 Command Line Reference Guide
• Dell Networking Z9500 Release Notes
About this Guide
33