Filter
Top Products
Figure 42. Membership Queries: Leaving and Staying
Configure IGMP
Configuring IGMP is a two-step process.
1. Enable multicast routing using the ip multicast-routing command.
2. Enable a multicast routing protocol.
Related Configuration Tasks
• Viewing IGMP Enabled Interfaces
• Selecting an IGMP Version
• Viewing IGMP Groups
• Adjusting Timers
• Configuring a Static IGMP Group
• Preventing a Host from Joining a Group
• Enabling IGMP Immediate-Leave
• IGMP Snooping
Internet Group Management Protocol (IGMP)
389