Filter
Top Products
In the show output, Rx Counters displays the number of bytes of control-plane traffic received, on which
queue-based rate limiting is applied. Tx Counters displays the number of bytes transmitted to a control-
plane CPU after queue-based rate limiting is applied. Drop Counters displays the number of bytes of
control-plane traffic that have been dropped as a result of queue-based rate limiting.
Dell#show control-traffic queue queue-id 0 counters
Queue-ID RxBytes TxBytes Drops
-------- -------- ------- -----
Q0 3439080 3439080 0
Dell#show control-traffic queue all counters
Queue-ID RxBytes TxBytes Drops
-------- -------- ------- -----
Q0 727996 727996 0
Q1 0 0 0
Q2 1101588 1101588 0
Q3 1257552 1257552 0
Q4 0 0 0
Q5 0 0 0
Q6 0 0 0
Q7 1178668 1178668 0
Q8 727996 727996 0
Q9 12600 12600 0
Q10 1101588 1101588 0
Q11 1257552 1257552 0
Q12 0 0 0
Q13 0 0 0
Q14 1160300 1160300 0
Q15 8515864 8515864 0
Q16 0 0 0
Q17 0 0 0
Q18 0 0 0
Q19 0 0 0
Q20 0 0 0
Q21 0 0 0
Q22 1157004 1157004 0
Q23 0 0 0
To clear the per-queue counters of rate-limited traffic at the aggregated (switch) or individual queue
level, use the clear control-traffic queue {all | queue-id queue-number} counters
command; for example:
Dell#clear control-traffic queue queue-id 2 counters
Dell#
240
Control Plane Policing (CoPP)