74 • Configuring Fax routing GFI FAXmaker for Exchange/SMTP Manual
, If you are using DTMF routing behind a PBX in combination with a
Brooktrout card, ensure that you have setup the Brooktrout card
correctly. Please visit the Cantata Technology website for more
information how to configure your card correctly for a particular PBX.
Adding DID/DTMF routes
1. Right click on the Routing > DTMF/DID node, and select 'New
DTMF/DID route'
Screenshot 74 - Creating a new DID route
2. Now enter the users’ routing number (or virtual fax number). For
example, if you have a 4 digit DID, you enter the 4 last numbers in this
dialog and click OK. The DID number will appear in the right pane of
the GFI FAXmaker configuration. You can also enter a range of DID
numbers.
Screenshot 75 - Specifying to which user the fax must be routed
Optionally you can specify 'Force number to have this amount of digits
– this will cause a range of, for example, 1- 100 to be noted as 0001-
0100 (if you specify 4)
NOTE: You can also import a list of users and DTMF numbers using
the import function
