GFI FAXmaker for Exchange/SMTP Manual The GFI FAXmaker API's • 157
GFI FAXmaker will try to send the fax on the line specified. However,
if the line is busy or unavailable, it will send it on another line.
To demand which fax line to use
::dl=linenumber
For example: ::dl=1
GFI FAXmaker will only send the fax on the line specified. If the line is
busy, the fax will not be sent until the line is available.
Alternatively you can also use the following method:
::line=linenumber, demandline or ::l=linenumber,dl
For example ::line=1,dl
To specify the sender of the message
::fr=name or ::from=name
For example: ::fr=John Smith
Replace ‘name’ with the name of the sender. This is only necessary
when using the Text API, as in this case GFI FAXmaker will not have
any information on the sender. If this option is used, GFI FAXmaker
will include the Sender name on the cover page and return a
transmission report to the sender.
To attach a file to your fax
::A=File name
For example: ::A=brochure.fax or ::A=disclaimer.txt
'File name' stands for the name of a fax attachment. Multiple
attachments can be added to the fax by specifying multiple attachment
commands as in the example.
NOTE: GFI FAXmaker searches for the attachment first in the
'coverpge' directory on the fax server and then in the TextAPI
directory.
Multiple options
When you are using multiple options in a message, you must enter
them on the same line, separated by a comma.
For example:
::c=cover1,23:15,B=5
This example sends a fax with ‘cover1’ as a cover page, scheduled for
23:15 hours, and will be charged to billing code 5.
