GFI FAXmaker for Exchange/SMTP Manual Configuring GFI FAXmaker for Lotus Notes • 173
Configuring GFI FAXmaker for Lotus
Notes
Introduction
GFI FAXmaker can be used as an Email2Fax gateway for Lotus
Notes, allowing users to address faxes using the @FAX method and
store fax recipients in their Lotus Notes address book.
In order to set this up, you must create a dedicated Notes mailbox
which will be used by GFI FAXmaker to receive faxes which GFI
FAXmaker must send out. Then you must configure a fax domain in
Lotus Notes, after which you can proceed to configure the GFI
FAXmaker Email2Fax gateway.
If you are configuring a Lotus Notes/Domino v6.5 server, you can
achieve the same result simply by configuring a foreign SMTP domain
on the Lotus server, to relay email to the FAXmaker server.
The configuration of Lotus Notes/Domino is described in 3 separate
paragraphs, depending on whether you have Lotus Domino/Notes
v6.5, Lotus Domino/Notes v6, or Lotus Notes v4/5. The last paragraph
describes how to configure the GFI FAXmaker Email2Fax gateway.
If using Active Directory, you must ensure that the e-mail address of
each GFI FAXmaker user has been entered in Active Directory. If you
don’t use Active Directory you have to configure the name and email
address of the GFI FAXmaker users. For more information, please
see the paragraph ‘Step 3: Specifying the fax administrator & users’ of
chapter ‘Installing GFI FAXmaker’.
Configuring Lotus Domino/Notes server 6.5
Step 1: Allow mail relay from Lotus Domino/Notes server
1. On the FAXmaker server, load the Internet Information Services
console.
2. Right-click on the Default SMTP Virtual Server node and select
Properties from the context menu.
3. Select the Access tab in the Default SMTP Virtual Server
Properties dialog, and click the Relay… button in the Relay
Restrictions group.
