18 • Installing the fax devices GFI FAXmaker for Exchange/SMTP Manual
2. Restart the machine. If your computer is running Windows 2000
and the ‘Add New Hardware’ wizard dialog comes up, ignore it by
pressing the Cancel button.
3. Download the GFI FAXmaker Brooktrout TR114 drivers
(brooktrout_tr114.exe) from
ftp://ftp.gfi.com This software contains
drivers which are made by Cantata Technology, however Cantata
Technology relies on vendors to distribute them.
NOTE: We recommend that you download and use these drivers
(instead of the ones supplied with your hardware) so to ensure that
you always have the latest drivers for your fax card.
4. After you have downloaded the drivers, run set-up by double-
clicking on brooktrout_tr114.exe. Setup will start by checking if there
is any Brooktrout software already installed on the machine. Should it
be the case, uninstall the existing Brooktrout software using the
Add/remove programs from the Control Panel. After, restart the
Brooktrout setup again by double-clicking on brooktrout_tr114.exe.
Screenshot 14- Brooktrout driver setup: Welcome dialog
5. The Brooktrout driver setup will start by displaying the welcome
dialog. Click on the Next button to proceed with installation.
