GFI FAXmaker for Exchange/SMTP Manual Configuring Fax server options • 97
This logic will allow you to use the following number notation in your
fax number entry:
+44-(020)-2282666
GFI FAXmaker will then determine in which country you are and if you
are in the same country, GFI FAXmaker will strip off the 44 and
optionally put a prefix in front of the number, for example 0.
If you are not in the same country, GFI FAXmaker can replace the +
with the international dialing prefix, for example 00 or 011.
National dialing
This option is especially important if you are based in North America.
Using this option you can enter your area code and ask GFI
FAXmaker to remove it if you are faxing to a number with the same
area code. In addition, you can add a prefix to the number. If the
number is not your local area code, you can set up GFI FAXmaker to
automatically add 1 as prefix.
NOTE: The area code in the fax number must be included in round
parentheses. If this is not done, the fax server cannot determine which
part of the number is the area code.
Screenshot 98 - The dialing exceptions dialog
Exceptions
Because some dialing procedures can be very complex (Especially
those in the US), you can set up a number of exceptions, which can
for example handle multiple local area codes.
The Exceptions dialog allows you to specify the different area codes
and exchanges for each number. It allows you to remove the area
code and add a prefix if needed. Since one area code may have
hundreds of exchanges, to avoid entering a lot of numbers with the
same area codes and different exchanges, you may enter a wild card
