Filter
Top Products
40 PI-MAX
®
4 System Manual Issue 4
Figure 3-1: Typical WinView/32 Setup Dialog
3.
Click Next > to continue with the installation, and continue to follow on-screen
prompts.
4. Once the installation has been completed, connect the camera to the host computer and
turn on the camera’s power supply.
5. Reboot the host computer.
Windows will automatically detect the newly-installed GigE card.
REFERENCES:
For additional information, refer to Section 4.6, WinX First
Light Instructions, on page 55.
4411-0137_0005