276 PI-MAX
®
4 System Manual Issue 4
Logic Out: Shutter Output Signal: Shutter Open
Minimum Block Size Final Section Height
Normal Shutter Normal (Shutter)
Number of Blocks Final Section Count
Number of Cleans Number of Clean Cycles
Number of Strips per Clean Clean Cycle Height
Post-Dummy Rows Parallel to Shift Register Active Area: Bottom Margin
Post-Dummy Shift Register Columns Active Area: Right Margin
Pre-Dummy Rows Parallel to Shift Register Active Area: Top Margin
Pre-Dummy Shift Register Columns Active Area: Left Margin
PreOpen (Shutter) Open Before Trigger (Shutter)
Readout Port Quality
Shutter Close Compensation Time Closing Delay
Shutter Control Shutter Mode
Shutter Open Compensation Time Opening Delay
Single Trigger Mode (DIF) Readout Per Trigger
Skip Serial Register Clean (deselected) Clean Serial Register
Target Temperature Temperature Setpoint
Timing Mode Trigger Response
Table C-1: WinX-to-LightField Cross Reference (Sheet 2 of 2)
WinX Term LightField Term