Filter
Top Products
286 PI-MAX
®
4 System Manual Issue 4
NOTE:
Adapter parts are machined to provide a tight fit. It may be necessary
to rotate the camera back and forth when inserting the sliding tube
into the spectrograph. Forcing the tube into the spectrometer could
permanently damage the tube and the spectrometer opening.
3. Loosen set screw with 3/32” hex wrench. 4. Loosen set screw.
5. Gently rotate and pull. 6. Finger tighten hex head screws. Leave
about ¼” thread exposed.
7. Mount tube to camera, align baffle with
bottom/top of camera, and tighten
mounting screws.
8. Gently rotate while inserting.
9. Tighten set screw. 10. Tighten set screw.