Filter
Top Products
Chapter 10 WinX and Dual Image Feature 165
4. On the Acquisition —> Experiment Setup… —> Timing tab, verify that Single Trig.
Mode
is the selected timing mode. Additionally, Continuous Cleans is recommended
for DIF. See Figure 10-5.
Figure 10-5: WinX Experiment Setup Dialog: Timing Tab
5.
From the Setup menu, select Pulsers. See Figure 10-6.
Figure 10-6: WinX Pulsers Dialog
6.
Select SuperSYNCHRO, and click the Setup Pulser button to display the
SuperSYNCHRO dialog.
4411-0137_0094
4411-0137_0009