Filter
Top Products
Chapter 6 LightField and Gated Operation 105
4. When using an Acton SpectraPro Series spectrograph, verify it was turned on when
LightField was launched.
If using an LS-785, an icon should be shown in the
Available Devices area.
When the spectrograph icon is dragged into the
Experiment Devices area, the
Spectrometer expander is added to the Experiment Settings stack with appropriate
parameters provided. See Figure 6-6 for typical expanders.
Figure 6-6: Typical Spectrometer Expanders
5.
Move the grating to the desired wavelength.
6. On the Region of Interest expander, select Full Sensor. See Figure 6-7.
Figure 6-7: Typical Region of Interest Expander: Full Sensor
ACTON SPECTRAPRO SERIES SPECTROGRAPH
LS785 SPECTROGRAPH
4411-0137_0071
4411-0137_0072