Princeton 4411-0139 Home Security System User Manual


 
All rights reserved. No part of this publication may be reproduced by any means without the written permission of Princeton Instruments, a division of
Roper Scientific, Inc. (“Princeton Instruments”.)
Printed in the United States of America.
Pentium is a registered trademark of Intel Corporation.
PVCAM is a registered trademark of Photometrics, Ltd. Corporation
Scientific Imaging ToolKit and SITK are trademarks of R Cubed Software Consultants, LLC.
IntelliCal, PICam, SuperSYNCHRO, and SyncMASTER are trademarks and IsoPlane, LightField, and PI-MAX are registered trademarks of Roper
Scientific, Inc.
Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries.
The information in this publication is believed to be accurate as of the publication release date. However, Princeton Instruments does not assume any
responsibility for any consequences including any damages resulting from the use thereof. The information contained herein is subject to change without
notice. Revision of this publication may be issued to incorporate such change.
Copyright 2012-2015 Princeton Instruments, a division of Roper Scientific, Inc.
3660 Quakerbridge Rd
Trenton, NJ 08619
TEL: 800-874-9789 / 609-587-9797
FAX: 609-587-1970
Revision History
Issue Date List of Changes
4 September 11, 2014 Issue 4 of this document incorporates the following changes:
Added information about the 1024EM and 1024EM(B) cameras.
3 October 11, 2013 Issue 3 of this document incorporates the following changes:
Added Section 13.3.3.3, Custom, which details the use of custom RF gating
in LightField for PI-MAX4: 1024i-RF systems;
Added PI-MAX4: 2048f information;
Updated Appendix A, Technical Specifications;
Added Section A.5, CCD Specifications.
2 July 24, 2013 Issue 2 of this document incorporates the following changes:
Added Chapter 14, PI-MAX4: EM Family, and other EM-supporting
information throughout the document;
Updated the Declarations of Conformity.
1.B February 11, 2013 Issue 1.B of this document incorporates the following changes:
Editorial, graphic, and global nomenclature updates.
1.A February 27, 2012 This is the initial release of this document