Filter
Top Products
128 PI-MAX
®
4 System Manual Issue 4
Figure 7-4: Block/Timing Diagram: Swept Gate Experiment
2.
Turn on all equipment and launch the WinX application software (version 2.5.25 or
greater.)
3. Open the Setup —> Hardware —> Hardware Setup dialog. The Hardware Setup
dialog should resemble that shown in Figure 7-5 which shows the setup for a KAI
1024x1024 interline camera.
Trigger In
*
* Level changes for T0 depend on the pulse sequence(s) defined by the user.
PI-MAX4
Photodiode
~12 ns
Delay is programmable.
Aux Out
GigE
96-264
4411-0137_0050