Filter
Top Products
Chapter 9 LightField and Dual Image Feature 153
9.3 Trigger Setup
Triggering for DIF operation is set up on the Trigger and the SuperSYNCHRO expanders.
Trigger setup consists of selecting the trigger response and the trigger source.
9.3.1 Trigger Response
The configured Trigger Response determines whether one or two triggers are required
for the acquisition. The trigger(s) can either be internally generated by the PI-MAX4 or can
be generated by an external source that is connected to the TRIGGER IN connector on the
rear of the camera.
The two Trigger Responses are:
• Readout Per Trigger
Two shot, one trigger for both shots.
• Shift Per Trigger
Two shot, each shot requires a trigger.
Trigger Response is configured on the Trigger expander. See Figure 9-3.
Figure 9-3: Trigger Expander
4411-0137_0102