Filter
Top Products
106 PI-MAX
®
4 System Manual Issue 4
7. Verify that the camera is operating and is properly focused by running it in “Internal
Trigger” mode.
Perform the following procedure to run in
Internal Trigger mode to verify camera
focus:
a. On the Common Acquisition Settings expander, within the Intensifier section,
configure the following parameters:
• Enable Intensifier: check the associated box;
• Intensifier Gain: Enter a value between 1 and 100, inclusive.
See Figure 6-8.
Figure 6-8: Typical Common Acquisition Settings Expander
b.
Within the Analog to Digital Conversion expander, configure the following
parameters:
•Speed;
• Analog Gain
See Figure 6-9.
Figure 6-9: Typical Analog to Digital Conversion Expander
4411-0137_0073
4411-0137_0074