Filter
Top Products
Appendix - 7
Appendices
Buffer memory address Compatibility
of setting value
of QD77MS2/
QD77MS4 and
QD77MS16
Item
Memory
area
QD77MS2
QD77MS4
QD77MS16
800+100n
801+100n
2400+100n
2401+100n
[Md.20] Current feed value
Axis monitor data
Monitor data
802+100n
803+100n
2402+100n
2403+100n
[Md.21] Machine feed value
804+100n
805+100n
2404+100n
2405+100n
[Md.22] Feedrate
806+100n 2406+100n
[Md.23] Axis error No.
807+100n 2407+100n
[Md.24] Axis warning No.
808+100n 2408+100n
[Md.25] Valid M code
809+100n 2409+100n
[Md.26] Axis operation status
810+100n
811+100n
2410+100n
2411+100n
[Md.27] Current speed
812+100n
813+100n
2412+100n
2413+100n
[Md.28] Axis feedrate
814+100n
815+100n
2414+100n
2415+100n
[Md.29] Speed-position switching control positioning amount
816+100n 2416+100n
[Md.30] External input signal
817+100n 2417+100n
[Md.31] Status
818+100n
819+100n
2418+100n
2419+100n
[Md.32] Target value
820+100n
821+100n
2420+100n
2421+100n
[Md.33] Target speed
824+100n
825+100n
2424+100n
2425+100n
[Md.34] Movement amount after near-point dog ON
826+100n 2426+100n
[Md.35] Torque limit stored value/forward torque limit stored
value
827+100n 2427+100n
[Md.36] Special start data instruction code setting value
828+100n 2428+100n
[Md.37] Special start data instruction parameter setting
value
829+100n 2429+100n
[Md.38] Start positioning data No. setting value.
830+100n 2430+100n
[Md.39] In speed limit flag
831+100n 2431+100n
[Md.40] In speed change processing flag
832+100n 2432+100n
[Md.41] Special start repetition counter
833+100n 2433+100n
[Md.42] Control system repetition counter
834+100n 2434+100n
[Md.43] Start data pointer being executed
835+100n 2435+100n
[Md.44] Positioning data No. being executed
836+100n 2436+100n
[Md.45] Block No. being executed
837+100n 2437+100n
[Md.46] Last executed positioning data No.
n: Axis No.-1
: Compatible : Partly compatible : Not compatible