Filter
Top Products
Initialize the Memory Tables?
Confirm
Cancel
Reference
Reference
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting Status
I/O Check
Display History
Memory I ni t.
Memory Swi tches
Section 3-4
Select “Confirm”.
The memory table is initialized.
If “Cancel” is selected instead of “Confirm”, the NT600S returns to the “Memory
Initialization Menu” without initializing the memory.
If a memory table is initialized in the Maintenance Mode, it is initialized regard-
less of the setting for the resume function (resume function: page 98).
Initialization of the Display History Data Memory
Thedisplayhistory(page110)isstoredintheorderofoccurrence (timeorder) orthe
order of frequency (frequent order). Since no more display history data can be
stored if the memory becomes full, the memory hasto be initialized at regular inter-
vals.
The display history data memory can be initialized by a command given from the
Host.
Using the System Menu, initialize the display history data memory by following the
procedure given below.
Select “Maintenance Mode”.
Select “Memory Init.”.