Filter
Top Products
Section 4-1
PT status control area: Section 5-4 NT600S Status Control (page 192)
PT status notify area: Section 5-5 Notification of the Operating Status to the PC
(page 197)
Numeral memory table: 5-2 Memory Tables and Bar Graph (page 164)
character-string memory table: 5-2 Memory Tables and Bar Graph (page 164)
Select a screen number and
press [Enter].
Create screen data in the Edit screen of the support tool. Data of one screen can
be created by registering (laying out) the following display elements and attributes
on the screen.
Numeral display:
Set numbers in the numeral memory table. ..... “Numeral Memory Table” (page 129)
Character-string display:
Set numbers in the character-string memory table. ...... “Character-String
Memory Table” (page 128)
Lamp:
Host link/NT link/C200H direct ..... Specify allocated bits.
RS-232C ............... Specify lamp address. ..... Section 4-6 Lamps (page 135)
Touch switch:
Host link/NT link/C200H direct
....................... Specify allocated bits for control and notification.
RS-232C ........ Specify touch switch number. ....... Section 4-7 Touch Switches
(page 138)
Bar graph:
Set numbers in the numeral memory table. ..... Section 4-5 Bar Graphs (page 131)
Numeral setting:
Set numbers in the numeral memory table. ...... Section 4-8 Numeral Setting
(page 143)
Character input: Input fixed character-strings.