Filter
Top Products
Reference
Section 4-3
The screen attributes are set for each screen by using the “screen selection”
screen of the support tool.
The support tool displays “alarm”, “backlight color”, etc. which are not used with
the NT600S.
If the numeral setting attribute on the NT600S has been set for “system”, the
touch switches [ENT], [
↓
], and [
↑
] which are allocated to the system besides the
numeric keys need to be created. (System key functions (page 142))
Bit input attributes (RS-232C communication only)
Select whether the touch switch number or bit information is notified to the host
when a touch switch is pressed. There are two types of bit input attribute in the
screen attributes, as indicated below.
Off :Bit control when a touch switch is pressed is invalid.
The status of the touch switch is notified using its number.
Touch SW :Bit control when a touch is pressed is valid.
The status of the touch switch is notified using bit information.
Backlight attributes (NT600S-ST121 only)
Select whether the backlight is lit or flashes when the screen is displayed. There
are two types of backlight attribute in the screen attributes, as indicated below:
Lit :Backlight is lit when the screen is displayed.
Flashing :Backlight flashes when the screen is displayed.
This attribute is invalid with the EL display type NT600S-ST211.