Filter
Top Products
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting Status
I/O Check
Display History
Memory I ni t.
Memory Swi tches
[ I/O CHECK MENU ]
Quit
LED
Buzzer
Backlight
Touch Switch
LCD Display
Communication I/F
DIP-Switch
Reference
Section 3-9
The “RUN” LED on the front face of the NT600S will flash. The “POWER” LED
remains lit.
To quit the LED check, press the “EXIT” touch switch. The I/O Check Menu will
be redisplayed.
Checking the Buzzer
Check the NT600S buzzer by using the menu operation from theSystem Menu as
mentioned below.
Select “Maintenance Mode”.
Select “I/O Check”.
Select “Buzzer”.
If the buzzer function is normal, the continuous buzzer sound will be made.
To stop the buzzer, press “EXIT” in the buzzer check screen.
Though memory switch setting for the buzzer has been made for OFF, the buzzer
will sound when the buzzer check is executed.
Checking the Touch Switches
Execute a touch switch check by the menu operation from the System Menu as
mentioned below.