Filter
Top Products
Section 1-1
2-1-1 Operations of NT600S
Displays Screens
The information to be displayed (screen data) can be created on a computer by
using support tools and stored in the NT600S. The screen data can be displayed
on the NT600S in response to the instructions from a PC/Host or touch switch op-
eration.
The screen data designated by
instructions from PC/Host or
touch switch operation is
displayed.
PC
Host
The NT600S can be connected to a PC/Host, and receive necessary data from it,
by using the host link function, the NT link function, the C200H direct communica-
tion function, or RS-232C.
OMRON’s PC
Host link, NT link, C200H direct
communication, RS-232C
PC
Host
Sends Data to a PC
Data input through a touch panel can be sent to a PC.
ON/OFF information,
numeric data, etc.
Touch panel
PC
Screen Data
The screen data to be displayed on the NT600S can be created by a computer by
using support tools. Connect the NT600S to a PC/AT with an RS-232C cable so
that the screen data are transferred to the NT600S.
This connection is made only to
transmit the screen data by using
NT600S and tools.
(If C200H direct communication is
used, the support tool and Host
can both be connected at the
same time.)
Create screen data.
PC/AT
(support tools)
Screen data
RS-232C
Receives Data from a PC/
Host