Filter
Top Products
SECTION 4
System Menu Operation
This section describes the operation of the System Menu focusing on the procedure to start up the NT600S.
Functions which will be convenient to use the NT600S and those which are useful for the system maintenance are
also explained here.
4-1 Operation Flow by the System Menu 66...........................................
4-2 Starting the NT600S 67.........................................................
4-2-1 Changing the System Settings etc. 67.......................................
4-3 Operation Modes and the System Menu 68........................................
4-3-1 System Menu and the Operation Modes 68..................................
4-3-2 Menu Tree 69............................................................
4-3-3 Operations with the System Menu 70.......................................
4-4 Initializing Memory 72..........................................................
4-4-1 Initialization of the Screen Data 72..........................................
4-4-2 Initialization by Using the DIP Switch (Forced Initialization) 74..................
4-5 Registering the Screen Data 79..................................................
4-6 Setting the Conditions of Communications with the PC/Host by Using the Memory Switches
83
4-6-1 Selecting the Host Communication Method 85...............................
4-6-2 Baud Rate Selection (Host Link Only) 86....................................
4-6-3 Setting Unit Numbers (NT Link 1:N Only) 87.................................
4-6-4 Setting the RS-232C Communication Conditions 89...........................
4-6-5 Selecting the Automatic Reset Function 90..................................
4-7 Starting the Operation 92.......................................................
4-8 Various System Settings 93.....................................................
4-8-1 Setting the Key Press Sound 93............................................
4-8-2 Using the Buzzer 94......................................................
4-8-3 Backlight OFF / EL Screen OFF Function 96.................................
4-8-4 Resume Function (Featured with Battery Unit Only) 98........................
4-8-5 Setting the Support Tool Mode 99..........................................
4-9 System Maintenance 101........................................................
4-9-1 I/O Check 101............................................................
4-9-2 Checking the NT600S DIP Switch Settings 107................................
4-9-3 Checking the PT Setting Status 108.........................................
4-9-4 Display History 110........................................................