Filter
Top Products
Caution
Reference
Section 5-1
The PT status control area (PC to PT) can be allocated to the following PC
areas.
Symbol CSeriesPCs Allocated CVM1/CV Series PCs Allocated
DM Data memory
✓
Data memory
✓
CH Internal/Special Relay
✓
Internal/Special Relay
✓
TIM Timer Timer
CNT Counter Counter
HR Holding Relay
✓
--
AR Auxiliary Relay
✓
Auxiliary Relay
LR Link Relay
✓
--
✓
:OK :NG
Since the special auxiliary relays of the CV series PCs are allocated to the system,
they cannot be used for purposes other than the system use.
Set so that there is no overlap between the PT status control area and PT status
notify area. Otherwise the system may operate unpredictably.
When NT link (1:N) is set, the PT status control area must be set for each con-
nected PT.
Notifying the Display Elements by Using Allocated Bits and Words
The NT600S will operate as follows in the display element notification operation.
[NT600S operation]
The NT600S will write any changes in the contents of the numeral or character-
string memory table being displayed or pressing of a touch switch to the bits and
words area in the PC.
[NT600S operation example]
Touch switch #12
Bit009012
Numeral memory table 100
Copy
Bit 009012:ON
Numeral memory table0
Number of saved words : 1
First word : DM0110
DM0110:0432
NT600S PC
0432