Filter
Top Products
About this Manual:
This manual describes the installation and operation of the NT600S Programmable Terminals (PTs) and
includes the sections described below. Further information is provided in manuals on the Host Interface
Units and Support Tool. Refer to the list in
Section 1 Introduction.
Please read this manual completely and be sure you understand the information provide before attempting
to install and operate a Programmable Terminal.
Section 1
introduces the PTs, describes the terminology used in this manual, and provides examples of
system configurations for programming and operation.
Section 2
provides procedures and specifications required to set up a PT system, including hardware
switch settings and installation.
Section 3
provides steps required for initial PT operation.
Section 4
describes functions used to create screens and control display attributes on the PT.
Included is automatic transfer of data from the host computer via character string and numeral tables.
Section 5
describes functions used to input data on-screen and transfer it to the host computer via the
numeral table.
Section 6
describes basic data transfer and maintenance functions.
Section 7
describes transferring screens online to and from the host computer.
Section 8
provides troubleshooting and basic maintenance methods, including battery replacement.
Appendices of OMRON products used with PTs, PT specifications, anda memory check table are provided
at the back of the manual.