Filter
Top Products
Section 3-3
4-3 Operation Modes and the System Menu
The NT600S operates in either “RUN”, “Transmit”, or “Maintenance” mode. The
operation modes can be switched by using the System Menu.
4-3-1 System Menu and the Operation Modes
Select an operation mode by pressing the corresponding touch switch in the Sys-
tem Menu. The operation modes with respect to the System Menu are related to
each other as shown below.
For the operations with the System Menu, refer tothe “Operations with theSystem
Menu” (page 70).
RUN mode
The NT600S runs in this
state. Controls from the
PC/Host are enabled
and various indications
and I/O operations are
made.
Transmit Mode
Screen data and other
data are transmitted
between the NT600S
and a support tool.
When system settings
and screen data
registration have been
completed
To change system
settings or screen
data contents
Power ON
[ SYSTEM MENU ]
Qui t
Transmit Mode
Maintenance Mode
Maintenance Mode
The NT600S
maintenance operations
such as memory initialize
and setting check are
executed.