Filter
Top Products
Section 4-8
Numeric Key Type
When a numerical value is input using touch switches to which numeric key func-
tions have been allocated, the input numerical value is displayed on the screen.
On pressing the return key after completing input, the input numerical value is writ-
ten to the numeral memory table and notified to the host.
If there is more than one numeral setting input field, the field in which theinput is to
be made can also be selected with the numeric keys.
In order to perform numeric key input, it is necessary not only to create a numeral
setting input field on the screen, but also to create the numeric keys to be used for
input (see page 146).
Displayed in the numeral
setting input field
Input
Input the numerical value using the
numeric keys on the screen.
Wr i t e
Notification
Numeral
memor y t abl e
Onpressing the key, the input value is written to the
numeral memory table andsimultaneously notified to the PC.
1234
1234 Host
NT600S
Thumbwheel Type (Ver.5 Direct Connection Only)
When using an NT600S-ST121/ST211-EV withVer.5direct connection, numeri-
cal values are input directly at the numeral setting input field using touch switches
that increment or decrement each of the digits in the display when pressed. Each
time the displayed numerical value is changed, the new displayed value is written
to the numeral memory table and simultaneously notified to the host.
This means that, when using the Thumbwheel type of numeral setting, all that is
required to input numerical values is to create the numeral setting input field onthe
screen.
Pressing the [--] key
decrements the digit by one.
Pressing the [+] key
increments the digit by one.
Wr i t e
Notification
Numeral
memor y t abl e
Each time a [+] or [--] key is pressed, the
input value is written to the numeral memory
table and simultaneously notified to the hos.
1234
1234 Host
NT600S