Filter
Top Products
110
(4.33)
53.5
(2.11)
74.5 (2.93)
100.2 (3.94)
105 (4.13) or less
4
(0.16)
30
(1.18)
30
(1.18)
45 (1.77)
(Unit: mm)
Appendix C
APPENDIX C
Handling the RS-232C/RS-422 Converter Unit
This section shows the dimensions of the RS-232C/RS-422 converter unit (NT-AL001), anddescribes the methods
for installing and removing it. Refer to this information when designing the control panel.
Dimensions
With RS-422A terminal block cover closed: 30 (W) x 114 (H) x 100.2 (D) mm
With RS-422A terminal block cover open: 30 (W) x 114 (H) x 119.5 (D) mm
Installation and Removal
The RS-232C/RS-422A converter unit (NT-AL001) is installed on a DIN rail or in an operation panel.
The RS-422A terminal block of the converter unit can easily be removed.