Filter
Top Products
Screen number
No. Freq. Message
24 ( ) Workpiece misalignment A.2
24 ( ) Workpiece misalignment A.2
4 ( ) Valve abnormality
26 ( ) Workpiece misalignment B.1
25 ( ) Workpiece misalignment A.3
35 ( ) Frequent stop
26 ( ) Workpiece misalignment B.1
35 ( ) Frequent stop
26 ( ) Workpiece misalignment B.1
26 ( ) Workpiece misalignment B.1
35 ( ) Compressor pressure upper limit
35 ( ) Compressor pressure upper limit
4 ( ) Valve abnormality
23 ( ) Workpiece misalignment A.1
25 ( ) Workpiece misalignment A.3
35 ( ) Frequent stop
EXIT NEXT
No. Freq. Message
PREV.
Page. 1/1
Reference
Screen number
Frequency data
No. Freq. Message
26 ( 4) Workpiece misalignment B.1
35 ( 3) Frequent stop
4 ( 2) Valve abnormality
35 ( 2) Compressor pressure upper limit
24 ( 2) Workpiece misalignment A.2
25 ( 2) Workpiece misalignment A.3
23 ( 1) Workpiece misalignment A.1
EXIT NEXT
No. Freq. Message
PREV.
Page. 1/1
Reference
Section 3-9
Display in time order
The recorded display history is displayed in the order the screens were dis-
played.
- Up to 40 items of recorded data are displayed in one screen.
- If the recorded data cannot be displayed in one screen, it is possible to scroll
the screen by pressing the [NEXT] or [PREV.] touch switch.
If there is no display history recorded, the following message is displayed.
“Display History not Found”
- Pressing the [EXIT] touch switch causes the NT600S to return to the “Display
History Menu”.
- If the display history is displayed in time order (order of occurrence), the dis-
play frequency data is not displayed.
Display in frequent order
- If the same message appears more than once, the message is displayed in
ascending order of the screen numbers.
- Up to 40 items of recorded data are displayed on one screen.
- If the recorded data cannot be displayed on one screen, scroll the screen by
pressing the [NEXT] or [PREV.] touch switch.
If there is no display history recorded, the following message is displayed.
“Display History not Found”
- Pressing the [EXIT] touch switch will cause the NT600S to return to the “Dis-
play History Menu”.