Filter
Top Products
Reference
Section 4-2
Enlarged display of the characters and marks
The characters and marks can be enlarged to the following scales.
x1 scale
Double
width
scale
Double
height
scale
x4 scale x9 scale x16 scale x64 scale
Smoothing
The characters and marks enlarged to the x4 scale or larger are displayed with
the outline automatically smoothed. This function is called “smoothing”.
Note that smoothing processing is not performed if characters are displayed at
x4 or a larger scale by giving an enlarging scale specifying command from a
Host.
Reverse and flashing display
Reverse display: The display brightness of the character and the
background is reversed comparing with the
normal display.
Flashing display: Characters are displayed as they flash. The
normal display alternates with no-display.
Reverse and flashing display: The reverse display alternates with the normal
display.
Types and Attributes of the Figures
The following types of figure can be input either by using the support tool or by
giving a command from the Host, and be displayed during operation. Continuous
straight lines including up to 256 vertexes can be drawn (up to 255 straight lines
can be connected).
Continuous straight lines Circle