Filter
Top Products
WEBVISION™
7 95-7769—01
Week and Day – If you select Week and Day, specify the
month, week, and year (Fig. 14).
Fig. 14. Add Special Event dialog box - Week and Day.
4. Enter/select the following information under Select State
• State – Occupied, Unoccupied, and Standby.
• Start Time – The time to start the special event.
• End Time – The time to end the special event.
NOTE: By default the occupancy state is 24 hours
Unoccupied.
5. Click OK to save the settings.
NOTE: Click Cancel to close the window without saving the
changes.
Default holiday list
Table 1 and Table 2 list the default holidays for the US and
Canada.
To add the pre-configured holidays:
1. Select the US Calendar or Canadian Holidays using the
drop-down list on the Special Event page.
2. Click Add. The selected (US or Canadian) pre-
configured list of holidays is added and is displayed in
tabular format.
IMPORTANT
Special events are not executed if you commit an
error in specifying them. WebVision cannot validate
the dates you enter for a special event. No error is
shown if you configure wrong dates for special event,
provided the dates are in the specified format.
Delete Schedules
To delete a schedule:
1. Click the Schedule tab.
2. Select the check box corresponding to the schedule you
want to delete from the Schedules Name list.
3. Click Delete. A confirmation message appears.
4. Click OK to confirm the deletion.
NOTE: Click Cancel to cancel deletion.
TIP: To delete all schedules at once, check the All check box
in the header and click Delete.
Replicate Schedule
You can replicate one schedule at a time. A maximum of 10
copies of the selected schedule can be replicated. Click
Replicate to replicate that schedule.
To replicate a schedule:
1. Click the Schedule tab.
2. Click Replicate. The Replicate Schedule box is
displayed.
3. Enter the number of copies that you want to create.
4. Add a prefix or suffix to the new replicated schedule's
name in the Label text box.
5. Click OK to confirm the replication.
NOTE: Click Cancel to cancel replication.
Table 1. Default US Holidays.
Name Day
New Year’s Days January 1st
Martin Luther King Jr. Day The third Monday in January
Presidents Day The third Monday in February
Memorial Day The last Monday in May
Independence Day July 4th
Labor Day The first Monday in September
Columbus day The second Monday in October
Veterans Day November 11th
Thanksgiving Day The fourth Thursday in November
Christmas Day December 25th
Table 2. Default Canadian Holidays.
Name Day
New Year’s Days January 1st
Canada Day July 1st
Labour Day The first Monday in September
Thanksgiving Day The second Monday in October
Remembrance Day November 11th
Christmas Day December 25th
Boxing Day December 26th