Filter
Top Products
WEBVISION™
95-7769—01 26
• Channel Info: (continued)
• Domain Length: Length of the Domain ID.
4. Click Save to save the settings.
To configure Dial-up settings:
Use the following procedure to configure the dial-up settings:
1. Click the Systems tab. The System page with General
Properties appears.
2. Click the Dial-Up Setup tab. The Dial-Up Setting page
appears.
3. Select required option from the Dial Up Type group
box. Whenever you are not on network and still want to
access WebVision, you can use the Dial-in facility.
Using this feature you can access WebVision from
anywhere.
4. Enter the following details.
• Dial In:
• Local IP Address: IP address of the local
machine from where you want to access the
WebVision application.
• Remote IP Address: IP address of remote
machine where WebVision application is hosted.
• User Name: Type the user name.
• Password: Type the password.
• Modem Setting:
• Initialization String: As specified in the
specification of the modem used.
• Baud Rate: As specified in the specification of
the modem used.
NOTE: The default modem settings works for most of the
modems. If the modem is not working, then change
the configuration.
5. Click Save to save the settings.
Deployment Diagram
Fig. 32. Deployment Diagram.
To enable Dial In settings:
Complete the following procedure to enable the dial in settings
on your computer/laptop:
1. Go to Start > Settings > Control Panel > Network
Connection.
2. Go to File > New Connection.
Fig. 33. File - New Connection menu selection.
3. The New Wizard screen appears. Click Next.
Fig. 34. New Connection Wizard screen.
WEBVISION
MODEM
PSTN
DAIL-UP ADAPTER
LOCAL IP ADDRESS
USERNAME
PASSWORD
MODEM
PC / LAPTOP
DAIL-UP ADAPTER
REMOTE IP ADDRESS
M28781