Filter
Top Products
8. Getting started
Image 8-82
Position subtype: Without Blend Zone
Note: Select Without Blend Zone if there is no ov erlap between channels.
Select With B len d Zone if at least one c orner of the current position is in an overlap zone.
9. From the Select Projectors that makeup this Position section, select the projector(s) of which at least one channel corner is meant
to be included in the selected position.
Image 8-83
Selecting the projector(s)
Note: Make sure that each selected projector is visible from the Head Location that you have selected.
10.Optional: If unwanted objects (artifacts) are visible in the current Camera Live view, they must be masked. Select a suitable
mask from the Mask Image drop down list. See "Creating Mask image", page 89.
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013
83