Filter
Top Products
8. Getting started
Image 8-38
Position type: Acuras Multi-point
3. Press the New buttontodefine a new position or select an existing position from the Position drop down list to change it. For a
new position, a name must be entered in the Position edit box.
Image 8-39
Creating a new position
Note: Selecting an existing p osition will highlight the selected projector us ed in this position.
Note: Use the Delete button to delete an existing position, if required. This will cause all capture data for this position to be lost.
Note: If yo u have selected an existing po sition and press the Test button, the selected existing pos ition is shown as a square
on the image and the laser dot is pointing at it. This can be used to check a Gimbal position.
4. Select the correct AutoAlignment Head location from the Head Location drop down list.
66
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013