Filter
Top Products
8. Getting started
- by pressing another Gimbal position from the Position subtype drop down list;
Image 8-55
Selection: Gimbal Corner 2 is selected
- or by pressing another square directly on the MP Acuras pos ition section of the GUI;
Image 8-56
Selection: Gimbal Corner 1 is focused
- or by jumping to another Gimbal position using the Gimbal control arrows on the GUI.
Image 8-57
Selection: Gimbal Corner 4 is focused
Automatically the Laser is switched ON.
3. Press the button Move Position to select the focused Gimbal position
Image 8-58
Gimbal Center is activated
Note: The s elected Gimba l position is indicated by a white background on the GUI and a w hite outline on the sm all square on
the projected image.
4. Press the button R to transfer the control to the navigation arrows on the eRACU hand held unit for the Gimbal movements.
72
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013