Filter
Top Products
5. Facility and system requirements
Image 5-3
AutoAlignment Head : position of air grids
5.4 Power requirements
Mains power
Mains power must be in the range 100–250V, 50–60Hz.
Power consumption
The total power consumption of the AutoAlignment Head is 25 Watt at 230 Volt.
5.5 View requirements
Design E ye Point
The Design Eye Point is the position from which the user is intended to view the total image for an optimal view of it.
Camera position
The best position for the AutoAlignment Head is that position where its camera is in the Design Eye Point.
Camera/Spectrometer field of view
Adequate space must be provided around the AutoAlignment Head. No physical or mechanical obstruction should be present in the
camera or spectrometer field of view.
5.6 Access requirements
AutoAlignment Head location and access
There must be enough space around the AutoAlignment Head to allow access to and flawless operation of the unit.
Following rules must be taken into account:
28
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013