Filter
Top Products
8. Getting started
Image 8-25
Laser: switch on by checking the according box
8. Using the Gimbal control arrows to point the laser beam at the center of the visible part of the image.
Image 8-26
Gimbal control arrows
Note: Use the S tep size buttons to increase or decrease the adjustment steps of the Gimbal.
Note: Press the R button to control the Gimbal movem ents using the navigation buttons on the eRACU hand held unit.
Image 8-27
Transferring control to eRACU handheld unit
9. Press the Save button.
60 R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013