Filter
Top Products
2. Safety
Environment condition check
The device must always be mounted in a manner which ensures the free flow of clean air into the air intake and out of the air outlet.
2.2.9 Repacking
On Repacking
Save the original shipping carton and packing material; they will come in handy if you ever have to ship your e
quipment. For maxi-
mum protection, repack your set as it was originally packed at the factory.
2.2.10 Emergency stop
Emergency stop
The emergency stop button is the large, circular red switch located at the rear side of the device. Pressing the emergency stop
button will disconnect the main power going to the modules of the MES ACURAS HEAD (RUGGED). To release it, turn the button
in the direction of the arrow. It should only be re-enabled if the situation is fully safe.
Use the emergency stop button only in emergencies.
E
M
E
R
G
E
N
C
Y
S
T
O
P
A
R
R
Ê
T
D
’
U
R
G
E
N
C
E
侶
㊴
⋫
㷱
Image 2-8
Emergency button + label
2.2.11 Moving parts
WARNING: Make sure that nobody and nothing is present within an area of 1 meter around the AutoAlignment
Head during operation.
Moving pa rts
• Keep your hands and fingers away from all moving parts.
• Do not wear loose clothing or jewelry. Keep long hair, clothing, scarves, rings, bracelets, gloves and such away from moving
parts, since they can be caught in moving parts.
• No people are allowed to come near the unit when it is in operation
• Do not operate the unit when other people can come near to the unit.
• Keep children, outsider, and other untrained persons away from the unit and its moving parts.
• Ensure that there is no loose cabling from the unit that can get caught by the moving parts.
Immediately stop operation if Gimbal Pan/Tilt does not respond to control
• Test Gimbal Pan/Tilt movement when initially operating the unit.
• Ensure Pan movement is going full -180º and +180º.
• Ensure Tilt movement is going full -80º and +30º.
• Ensure all controls function smoothly and do not stick or bind when operated.
• Avoid any type of manual intervention when operating the unit.
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013
13