10. Operating Acuras
It is alw ays necessary to reset the white uniformity of the projector to its factory (original) settings, in case
the white uniformity file o f the projector is corrupted.
Restoring the white uniformity factory settings does not destroy any Acuras Ca pture data.
How to restore the w hite uniformity factory settings on the projector?
1. Navigate to Light Output page and activate the required Golden Alignment set.
Image 10-42
Activating a Golden Alignment set
Note: Make sure that the selected Golden A lignment set has the set of the projector(s) on which the white uniformity factory
settings need to be restored.
2. Navigate to the A curas page and make either of the selections:
- If you wish to restore the factory white uniformity settings on the selected set of projectors, select the desired projectors or
select all projectors in that group.
Image 10-43
Selecting the desired projector(s)
- select group, if you wish to restore the factory white uniformity settings on all projectors of this group.
Image 10-44
Group selected
3. Press Set to Factory Settings.
Image 10-45
Initiating the white uniformity process
4. In the appearing White Uniformity dialog,
-pressSelected G roup to reset the white uniformity of all projectors to its factory settings;
-pressSelected Projector to reset the white uniformity of the selected projector(s) to its factory settings;
-pressCancel to abort the restoring white uniformity process.
130
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013