Filter
Top Products
8. Getting started
Image 8-70
Saving the new Acuras Multi-Point
The Panel Marker positions and Gimbal positions are now saved along with the selected projector, spectrometer, laser and head
location.
Obstructed point
If the laser dot can not be pointed to one of the side Panel Markers because of a mechanical obstruction (e.g. cockpit, metal beam),
the according Gimbal position can be set as Obstructed p oint, by checking the concerning check box. This Gimbal position is then
marked with a ’no entrance’ sign on the projected image and on the GUI. Only one of the side Panel Markers can be set as an
Obstructed point.
Position Subtypes which are already s tored can be verified b y selecting them. The appro priate Pan el M arker
is then indicated on screen and the Gimb al points to it.
If an existing Panel Marker is changed, it will be requ ired to redefine one or more Gimbal positions.
Changes to Panel Markers and/or G imbal positions o f an existing Ac uras Multi-point position are only saved
after pressing the Save button.
Make sure that allGimbal positions for a single display channel is defined from a single physical head location.
Also ensure that this physical head location is present and corresp onds to the AutoAlignment Head location
selected on the Position page.
Changing this p hysical head location or selecting a different AutoAlignment He ad location on the Position
page will require the user to re-define all Gimbal p
ositions.
8.6.3 AutoGeometry position: Faceted display
AutoGeometry: Faceted display
The goalof AutoGeometry isto determinethe position of thescreen corners in relation to thepanel ofthe corresponding
projector(X and Y projector pixel coordinates), wheredeviations betweenthe captured andrealigned state are returned
to the Image Generator in order to make corrections
Overview
• Difference between AutoGeometry faceted and warp display
•Defining AutoGeometry position: standard channels
•Defining AutoGeometry position: Head-Up Display
• Creating Mask image
8.6.3.1 Difference between AutoGeometry faceted and warp display
IG
Image Generator
Differences
The table below list the differences between the AutoGeometry faceted and warp display and also indicated which one is to be
selected when.
76
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013