Filter
Top Products
8. Getting started
Image 8-23
Selecting a projector
Note: For each projector only one Acuras position can be defined.
Note: Make sure that the selected projector com es under the Head location that you have selected.
6. From the Select Cam era, Spectrometer and Laser subsection select the following devices from the drop down lists:
- spectrometer
- laser
Note: The name of the spectrometer and laser is entered in the XDS RACU user interface during definition of theAutoAlignment
Head.
Image 8-24
Selecting spectrometer and laser
7. Check the Laser checkbox to switch it ON.
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013
59