Filter
Top Products
10. Operating Acuras
Image 10-20
Acuras capture process in progress
Pressing the Interrupt button stop s the Acuras Capturing process. The Gimbal returns to its home position.
and the following confirmation dialog appears. The system will return to its previous situation and no data
will be lost.
Image 10-21
10.4 Acuras Realignment
Acuras Realignment
Executing Realignment realigns colors and brightness of the system and optionally white uniformity of each channel to the values
measured at Capture time. If the brightness can not be restored to the original or reference value because a projector dimmer
reaches 100%, Acuras Realignment lowers the CLO targets of all projectors and returns a confirmation message.
Acuras Realignment is done on an as-needed basis to maintain an optimal visual display. A user can choose between fast realign-
ment (Simple Acuras) and advanced alignment (Advanced Acuras). In an advanced realignment some steps are added.
• Gray level correction: restore the gray level tracking of the projector.
• Multi-point Acuras: restore the projector white uniformity to the initial measured values.
The following Acuras Realignment operations are possible:
• Simple A curas: uncheck both Mult-point Acu ras and Perform Gray Level Correction check boxes. Now only single point
Acuras realignment is performed: colors and brightness amongst the channel center points are matched.
Acuras 1-Point
Image 10-22
Simple Acuras
124 R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013