Filter
Top Products
10. Operating Acuras
Image 10-38
Pressing the Undo Changes button
3. In the appearing A curas dialog,
-pressSelected Group to run the Acuras undo realignment process to all projectors of the selected group.
-pressSelected Projector to run the Acuras undo realignment process to the selected projector(s) of the selected group.
-pressCanc el to abort the Acuras undo realignment.
Image 10-39
Acuras dialog
A message appearing in the feedback section shows the progress information.
Image 10-40
Acuras undo realignment process completed
Pressing the Interrup t button stops the Acu ras u ndo realignment process. Th e Gimbal returns to its home
position and the following confirmation dialog appears. The system will return to its previous situation and
no da ta wil l be lost.
Image 10-41
10.6 Restoring the white uniformity factory settings
Restoring the white uniformity factory settings
In case of following fundamental changes in the display system (example: projector’s displacement or projectors swap or white
uniformity file of the projec
tor is corrupted), the user can restore the projector’s white uniformity factory settings on it. Pressing Set
to Factory Setti ngs reset the white uniformity of the selected projector(s) to its factory (original) settings.
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013
129