Filter
Top Products
9. Dynacolor™ calibration
Image 9-6
Desired values applied successfully to all projectors
8. If there still is some color variation in the final image from projector to projector you may need to adjust the desired values
manually.
9. Identify the projector(s) due to which there is a color variation.
10.Select one of the identified projectors and adjust its desired white point and primary color x and y values. See image 9-7.
11.Press the Apply Single button to upload the newly adjusted desired value(s) to that projector.
Image 9-7
Desired white point va
lues applied successfully to the selected projector
12.Repeat steps 9 to 11 until remaining color variations on the system are minimized.
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013
111