Filter
Top Products
7. Installation
Image 7-21
Camera settings
7.6.2 Lens cap
Lens ca p setting
Remove the lens cap before turning on the camera. If you turn on the camera before removing the lens cap, no image will be visible
when looking through its ocular.
7.6.3 Zoom
Zoom setting
By default, zoom has been set to 18 mm (Wide view) in the factory and doesn’t need to be changed. If you decide that zoom setting
should be changed in a specific application, adjust it prior to setting focus.
Necessary tools
Torx screwdriver T20
How to adjust the zoom setting?
1. Loosen the four screws fixing the zoom ring brackets half a turn anticlockwise. See label 1
44
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013