Filter
Top Products
8. Getting started
The shape of the visible chann el area can be more gen eral than the rectangular examples ab ove.
While defining the AutoGeometry positions, you can use both Position subtype With Blend Zone or Without
Blend Zone depending on corner types in that position. If the defined position has bo th overlapping and non
overlapping corners, you must select Position su btype With Blend Zone.
Auto Exposure
Auto Exposure is an optimization of the camera integration time. If that time is too low, the scene is too dark and not
visible. If it is too high, the scene will be saturated and not clear.
How to define AutoGeometry positions for standard channels?
1. Project any image or internal pattern from the projector(s) for the desired AutoGeometry position.
2. On the Positioning Page, navigate to Position > Position type and select AutoGeometry from the drop down list.
Image 8-74
Position type: AutoGeometry
3. From the Select Camera, Spectrometer and Laser subsection select Camera from the drop down lists.
R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013
79