Filter
Top Products
8. Getting started
Image 8-106
Gimbal control arrows
Caution: Make sure that at least one quadrilateral image (ap proximately, formed by the LDAT’s laser dots) is appearing inside
the Camera Live view of ever y Position to be saved. A Position not having any single quadrilateral image appearing
on it is invalid.
A
B
Image 8-107
Bad example: No quadrilateral image on the position
A CameraLiveView
B Positiontobesaved
A
B
Image 8-108
Good example: One quadrilateral image on the position
A Camera Live View
B Positio n to be saved
Note: A good practice is to bring as much area of the Position as possible inside the c amer a live view.
Note: Use the Step size buttons to increase or decrease the adjustment steps of the Gimbal.
Note: Press R to control the Gimbal mo veme nts using the nav igation buttons on the eRA CU hand held unit.
11.From the Select Projectors that makeup this Po sition section, select the projector(s) to be included in the selected position.
94 R59770509 AUTOALIGNMENT HEAD GEN II 26/11/2013