Filter
Top Products
72
SONICWALL SONICOS STANDARD 3.0 ADMINISTRATOR’S GUIDE
C
HAPTER
9:
Configuring Network Settings
Configuring Transparent Mode
Transparent Mode requires valid IP addresses for all computers on your network, and allows remote
access to authenticated users.
To enable Transparent Mode:
1
Click the Edit Icon in the line for the OPT interface in the Interfaces table. The OPT Properties
window displays.
2
Select OPT in Transparent Mode. The OPT and WAN IP addresses are now identical.
3
To add an address or range of addresses, click Add below the address range list. The
Add Opt Entry dialog box displays.
4
Enter a single IP address or the beginning of a range of IP addresses in the IP Address From
field.
Note: The address or range of addresses must be within the available range of IP addresses for your
WAN interface.
5
For a range of IP addresses, enter the ending address in the IP Address To field.
6
Click OK and then click Apply.